Product Photos

Photos can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

The following PSD mockup files are recommended:

Version 1

Acrylic prints can be visually indicated in product photos by a sheen effect on the surface of the print due to the reflective nature of the surface. To simulate this effect, follow these instructions in Photoshop:

1) Import your desired product image into your product photo image document.
2) Add a layer of white on top of the product image to cover the whole image.
3) Using masking tools set to varying opacities of less than 100%, slowly mask away parts of the white overlay to reveal the product image underneath. You should do this in a consistent diagonal direction.
4) Keep masking the white overlay until only slight streaks remain that look like a sheen effect on top of the product image.
5) Your product image is now complete and ready for export.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Photos can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

The following PSD mockup files are recommended:

Version 1

Note: The color of the grommets in the mockup need to be edited to match the brass color of our grommets.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

360 photos can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

Stretched Canvas photos can be downloaded here.

Framed Canvas photos can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

The following PSD mockup files are recommended:

Version 1

Version 2

Version 3

Version 4

Version 5

To create simulated unframed canvas prints product shots, follow these instructions in Photoshop.

1) Import your desired product image into your product photo image document.
2) Duplicate the product image layer.
3) Crop the duplicated layer to just a small section of the left side while retaining the full height. Position this layer up against the left side of the original product image layer. Then add an 18% black fill to the duplicated layer. This duplicated layer will be used to create the “side” of the canvas.
4) Distort the top right and bottom right corners of the original image layer to create perspective so that it appears as though you are viewing the product at an angle.
5) Distort the top left and bottom left corners of the “side” image layer to complete the perspective effect. You may need to play with the layers a little bit to achieve a realistic perspective view of the product.
6) Create a new tall white rectangle layer at 30% opacity that is the same height as the tall side of the 2 image layers and 2px to 4px wide depending on the size of your product photo image document. Feather the edges of this rectangle so that it is soft all around. Place this rectangle at the intersection of the 2 underlying image layers to simulate a sheen effect on the edge of the product where they meet.
7) Your product image is now complete and ready for export.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Photos can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

The following PSD mockup files are recommended:

Version 1

Metal prints can be visually indicated in product photos by a sheen effect on the surface of the print due to the semi-reflective nature of the surface. To simulate this effect, follow these instructions in Photoshop:

1) Import your desired product image into your product photo image document.
2) Add a layer of white on top of the product image to cover the whole image.
3) Using masking tools set to varying opacities of less than 100%, slowly mask away parts of the white overlay to reveal the product image underneath. You should do this in a consistent diagonal direction.
4) Keep masking the white overlay until only slight streaks remain that look like a sheen effect on top of the product image.
5) Your product image is now complete and ready for export.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

The following PSD mockup files are recommended:

Version 1

Version 2

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

Photos can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

The following PSD mockup files are recommended:

Version 1

Version 2

Version 3

Version 4

Note: Frames should be designed to visual styling of actual products (correct frame, border, and depth sizing).

Unframed paper prints can be mocked up as a product photo by adding a slight drop shadow to an image placed atop a light background. Black or white mats can be created simply by adding a black or white layer under the image to simulate the border. The size of the border depends on the desired product image size and the size of the border (1”, 2”, etc.).

Photos can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

The following resources are recommended to simulate the peel of the adhesive print:

Version 1

Use a page peel graphic such as the one listed as a recommended resource to mock up a product image with a peel effect.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.

Photos can be downloaded here.

PSD Mockups created for your use can be downloaded here.

The following PSD mockup files are recommended:

Version 1

Square Pillow

Version 2

Square Pillow

Version 3

Rectangular Pillow

Version 4

Assorted Pillows

Version 5

Square Pillow

Version 6

Square Pillow On Chair

Version 7

Stacked Pillows

Photos can be downloaded here.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Note: This is a regional product exclusively made by our United Kingdom facility.

Photos can be downloaded here.

PSD mockups created for your use can be downloaded here.

Template files can be downloaded here. To use, simply drop your desired product image underneath the template layer. Then resize your product image to fit within the transparent image area of the template layer.